Configuration files from ‘setup-cisco’ & the Endpoint Manager in trixbox V2.0
Back to Cisco SIP Phone How-to
Please note: each line in the actual files should start at the left hand end of the line and should not have a space. If you cut and paste from this page remove the leading space.
SIPDefault.cnf
# Outline SIPDefault.cnf # change every instance of trixbox_IP to your trixbox server IP # eg replace "trixbox_IP" with something like "192.168.5.100" # Image Version # set this to the image version that you want image_version: "P0S3-08-6-00" # Proxy Server proxy1_address: "trixbox_IP" # Proxy Server Port (default - 5060) proxy1_port:"5060" # Emergency Proxy info proxy_emergency: "trixbox_IP" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "trixbox_IP" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "" outbound_proxy_port: "5060" # NAT/Firewall Traversal nat_enable: "0" nat_address: "" voip_control_port: "5061" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "0" # Proxy Registration (0-disable (default), 1-enable) proxy_register: "1" # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: "3600" # Codec for media stream (g711ulaw (default), g711alaw, g729) preferred_codec: "none" # TOS bits in media stream [0-5] (Default - 5) tos_media: "5" # Enable VAD (0-disable (default), 1-enable) enable_vad: "0" # Allow for the bridge on a 3way call to join remaining parties upon hangup cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default) # Allow Transfer to be completed while target phone is still ringing semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default) # Telnet Level (enable or disable the ability to telnet into this phone telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged # Inband DTMF Settings (0-disable, 1-enable (default)) dtmf_inband: "1" # Out of band DTMF Settings (none-disable, avt-avt enable (default), # avt_always - always avt ) dtmf_outofband: "avt" # DTMF dB Level Settings # (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up) dtmf_db_level: "3" # SIP Timers timer_t1: "500" ; Default 500 msec timer_t2: "4000" ; Default 4 sec sip_retx: "10" ; Default 11 sip_invite_retx: "6" ; Default 7 timer_invite_expires: "180" ; Default 180 sec #timer_invite_expires: "120" # Setting for Message speeddial to UOne box messages_uri: "*97" # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: "./" # Time Server Set time zone to your location # Currently on this system the tz is GMT sntp_mode: "unicast" sntp_server: "trixbox_IP" time_zone: "GMT" dst_offset: "1" dst_start_month: "April" dst_start_day: "" dst_start_day_of_week: "Sun" dst_start_week_of_month: "1" dst_start_time: "02" dst_stop_month: "Oct" dst_stop_day: "" dst_stop_day_of_week: "Sunday" dst_stop_week_of_month: "8" dst_stop_time: "2" dst_auto_adjust: "1" # Do Not Disturb Control # (0-off, 1-on, 2-off with no user control, 3-on with no user control) dnd_control: "0" ; Default 0 (Do Not Disturb feature is off) # Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, # 3-enabled no user control) callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous) # Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, # 3-enabled no user control) anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls) # Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control) call_waiting: "1" ; Default 1 (Call Waiting enabled) # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) dtmf_avt_payload: "101" ; Default 100 # XML file that specifies the dialplan desired dial_template: "dialplan" # Network Media Type (auto, full100, full10, half100, half10) network_media_type: "auto" #Autocompletion During Dial (0-off, 1-on [default]) autocomplete: "1" #Time Format (0-12hr, 1-24hr [default]) time_format_24hr: "0" # URL for external Phone Services services_url: "http://trixbox_IP/xmlservices/index.php" # URL for external Directory location directory_url: "http://trixbox_IP/xmlservices/PhoneDirectory.php" # URL for branding logo logo_url: "http://trixbox_IP/cisco/bmp/trixbox.bmp" # Remote Party ID remote_party_id: 1 ; 0-Disabled (default), 1-Enabled
SIPmacaddress.cnf
# Cisco SIP Configuration # extension 1 3456 # extension 2 3457 phone_label: "7960..." line1_name: "3456" line1_shortname: "3456" line1_displayname: "3456" line1_password: "3456pswd" line2_name: "3457" line2_shortname: "3457" line2_displayname: "3457" line2_password: "3457pswd" line3_name: "UNPROVISIONED" line3_shortname: "UNPROVISIONED" line3_displayname: "UNPROVISIONED" line3_password: "UNPROVISIONED" line4_name: "UNPROVISIONED" line4_shortname: "UNPROVISIONED" line4_displayname: "UNPROVISIONED" line4_password: "UNPROVISIONED" line5_name: "UNPROVISIONED" line5_shortname: "UNPROVISIONED" line5_displayname: "UNPROVISIONED" line5_password: "UNPROVISIONED" line6_name: "UNPROVISIONED" line6_shortname: "UNPROVISIONED" line6_displayname: "UNPROVISIONED" line6_password: "UNPROVISIONED" line1_authname: "34546" line2_authname: "3457" line3_authname: "UNPROVISIONED" line4_authname: "UNPROVISIONED" line5_authname: "UNPROVISIONED" line6_authname: "UNPROVISIONED" # end SIPmacaddress.cnf
Back to Cisco SIP Phone How-to